Instrumentation, Op Amps, Buffer Amps
Compare the current Instrumentation, Op Amps, Buffer Amps Linear selection by manufacturer, stock status, datasheet and technical parameters. Use these details to narrow the list to parts that match your design, maintenance or purchasing requirements.
For a specific MPN, package, electrical rating or quantity requirement, send the details to EGOO. We can help confirm availability, quotation and alternative sourcing options.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD8134ACPZ-REELIC OPAMP DIFF 3 CIRCUIT 24LFCSP |
4,499 | - |
|
Datasheet | - | 24-WFQFN Exposed Pad, CSP | Tape & Reel (TR) | Active | Differential | 3 | Differential | 1600V/µs | - | 450 MHz | 67 µA | 4 mV | 31mA | 90 mA | 4.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 24-LFCSP-WQ (4x4) |
|
LTC6082CDHC#TRPBFIC CMOS 4 CIRCUIT 16DFN |
4,281 | - |
|
Datasheet | - | 16-WFDFN Exposed Pad | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 1V/µs | 3.5 MHz | - | 0.2 pA | 90 µV | 330µA (x4 Channels) | 24 mA | 2.7 V | 5.5 V | 0°C ~ 70°C | - | - | Surface Mount | 16-DFN (5x3) |
|
LTC6082CGN#TRPBFIC CMOS 4 CIRCUIT 16SSOP |
2,908 | - |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 1V/µs | 3.5 MHz | - | 0.2 pA | 90 µV | 330µA (x4 Channels) | 24 mA | 2.7 V | 5.5 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SSOP |
|
AD8475BRMZ-RLIC OPAMP DIFF 1 CIRCUIT 10MSOP |
4,699 | - |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Differential | 1 | Differential, Rail-to-Rail | 50V/µs | - | 150 MHz | - | - | 3mA | 110 mA | 3 V | 10 V | -40°C ~ 85°C | - | - | Surface Mount | 10-MSOP |
|
AD711KRZ-REELIC OPAMP JFET 1 CIRCUIT 8SOIC |
3,415 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 1 | - | 20V/µs | - | 4 MHz | 15 pA | 200 µV | 2.5mA | 25 mA | 9 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
ADA4254ACPZ-RLIC OPAMP ZER-DRIFT 1CIRC 28LFCSP |
3,637 | - |
|
Datasheet | - | 28-WFQFN Exposed Pad, CSP | Tape & Reel (TR) | Active | Zero-Drift | 1 | Differential | 1.9V/µs | - | 2.3 MHz | 450 pA | 3 µV | - | 11 mA | 10 V | 56 V | -40°C ~ 105°C | - | - | Surface Mount | 28-LFCSP (5x5) |
|
ADA4254ARUZ-RLIC OPAMP ZER-DRIFT 1CIRC 24TSSOP |
3,456 | - |
|
Datasheet | - | 24-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | Zero-Drift | 1 | Differential | 1.9V/µs | - | 2.3 MHz | 450 pA | 3 µV | - | 11 mA | 10 V | 56 V | -40°C ~ 105°C | - | - | Surface Mount | 24-TSSOP |
|
AD8607ARM-R2IC OPAMP GP R-R CMOS DUAL 8MSOP |
4,292 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Cut Tape (CT) | Obsolete | CMOS | 2 | Rail-to-Rail | 0.1V/µs | 400 kHz | - | 0.2 pA | 12 µV | 40µA (x2 Channels) | 70 mA | 1.8 V | 5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
LT1672CN8#PBFIC OPAMP GP 1 CIRCUIT 8DIP |
4,744 | - |
|
Datasheet | Over-The-Top® | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.005V/µs | 12 kHz | - | 25 pA | 200 µV | 1.9µA | 1.5 mA | 2.2 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LTC6410IUD-6#TRPBFIC OPAMP DIFF 1 CIRCUIT 16QFN |
2,153 | - |
|
Datasheet | - | 16-WFQFN Exposed Pad | Tape & Reel (TR) | Last Time Buy | RF/IF Differential | 1 | Differential | 1500V/µs | - | 1.4 GHz | - | 400 µV | 125mA | 42 mA | 2.8 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-QFN (3x3) |
Instrumentation, Op Amps, Buffer Amps FAQ
How can I narrow the current Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical filters to compare matching parts by specifications, stock status, pricing and datasheet information.
Can EGOO help source hard-to-find or obsolete Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send the manufacturer part number and required quantity to our sourcing team for availability, lead-time and alternative sourcing support.
Can I request a quotation for a BOM or small-batch requirement?
Yes. EGOO supports BOM sourcing, prototype quantities and small-batch purchasing. Provide your part list and quantities for a quotation review.
What information should I provide when requesting a quote?
Please provide the target part number, manufacturer, quantity and any required date code, package or delivery requirements so our team can respond more accurately.
