Instrumentation, Op Amps, Buffer Amps
Compare the current Instrumentation, Op Amps, Buffer Amps Linear selection by manufacturer, stock status, datasheet and technical parameters. Use these details to narrow the list to parts that match your design, maintenance or purchasing requirements.
For a specific MPN, package, electrical rating or quantity requirement, send the details to EGOO. We can help confirm availability, quotation and alternative sourcing options.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LM124AJBQUAD, 30-V, 1.2-MHZ, 3-MV OFFSET |
1,119 | - |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Tube | Active | General Purpose | 4 | Push-Pull | 0.5V/µs | 1.2 MHz | - | 50 nA | - | 1.4mA | 30 mA | 3 V | 32 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 14-CDIP |
|
NE5534PSPROTOTYPE |
2,833 | - |
|
Datasheet | - | 8-SOIC (0.209", 5.30mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Push-Pull | 13V/µs | 10 MHz | - | 500 nA | 500 µV | 4mA | 38 mA | 10 V | 30 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SO |
|
TLC2652MJGPRECISION CHOPPER-STABILIZED ADV |
1,808 | - |
|
Datasheet | LinCMOS™ | 8-CDIP (0.300", 7.62mm) | Tube | Active | Chopper (Zero-Drift) | 1 | Single-Ended | 3.1V/µs | 1.9 MHz | - | 4 pA | 0.6 µV | 1.5mA | 50 mA | 3.8 V | 16 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 8-CDIP |
|
TL072CP-NGPROTOTYPE |
3,542 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Obsolete | General Purpose | 2 | Push-Pull | 20V/µs | 5.25 MHz | - | 65 pA | 3 mV | 1.4mA (x2 Channels) | - | 4.5 V | 40 V | 0°C ~ 70°C (TA) | - | - | Through Hole | 8-PDIP |
|
TL3474MIPWRPROTOTYPE |
3,286 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Bulk | Active | General Purpose | 4 | Push-Pull | 13V/µs | 4 MHz | - | 100 nA | 1 mV | 3.5mA (x4 Channels) | 34 mA | 4 V | 36 V | - | - | - | Surface Mount | 14-TSSOP |
|
|
LMC6484AMJ/883ULTRA-LOW BIAS CURRENT, PRECISIO |
4,806 | - |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Tube | Active | CMOS | 4 | Rail-to-Rail | 0.9V/µs | 1.25 MHz | - | 100 pA | - | - | 30 mA | 3 V | 15.5 V | -55°C ~ 125°C | - | - | Through Hole | 14-CDIP |
|
|
LMH6628WG-QMLDUAL WIDEBAND, LOW NOISE, VOLTAG |
1,170 | - |
|
Datasheet | LMV® | 10-CSOIC (0.241", 6.12mm Width) | Tray | Active | Voltage Feedback | 2 | Single-Ended | 550V/µs | 300 MHz | 50 MHz | 10 µA | - | 9mA (x2 Channels) | 85 mA | 5 V | 12 V | -55°C ~ 125°C | - | - | Surface Mount | 10-CFP |
|
|
LM747J/883/MABIPROTOTYPE |
2,432 | - |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | Single-Ended | 0.2V/µs | 250 kHz | - | 500 nA | - | - | 50 mA | - | 44 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 14-CDIP |
|
|
TLC2652AMJBPRECISION CHOPPER-STABILIZED ADV |
3,650 | - |
|
Datasheet | LinCMOS™ | 14-CDIP (0.300", 7.62mm) | Tube | Active | Chopper (Zero-Drift) | 1 | Single-Ended | 2.8V/µs | 1.9 MHz | - | 4 pA | 0.5 µV | 1.5mA | 50 mA | 3.8 V | 16 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 14-CDIP |
|
|
INA2132AQDRDNPROTOTYPE |
1,955 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Differential | 2 | Single-Ended | 0.1V/µs | - | 300 kHz | - | 75 µV | 160µA (x2 Channels) | 12 mA | 2.7 V | 36 V | -55°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
How can I narrow the current Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical filters to compare matching parts by specifications, stock status, pricing and datasheet information.
Can EGOO help source hard-to-find or obsolete Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send the manufacturer part number and required quantity to our sourcing team for availability, lead-time and alternative sourcing support.
Can I request a quotation for a BOM or small-batch requirement?
Yes. EGOO supports BOM sourcing, prototype quantities and small-batch purchasing. Provide your part list and quantities for a quotation review.
What information should I provide when requesting a quote?
Please provide the target part number, manufacturer, quantity and any required date code, package or delivery requirements so our team can respond more accurately.
