Instrumentation, Op Amps, Buffer Amps
Compare the current Instrumentation, Op Amps, Buffer Amps Linear selection by manufacturer, stock status, datasheet and technical parameters. Use these details to narrow the list to parts that match your design, maintenance or purchasing requirements.
For a specific MPN, package, electrical rating or quantity requirement, send the details to EGOO. We can help confirm availability, quotation and alternative sourcing options.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA197QDGKRQ1IC OPAMP GP 1 CIRCUIT 8VSSOP |
1,668 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 20V/µs | 10 MHz | - | 5 pA | 25 µV | 1mA | 65 mA | 4.5 V | 36 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-VSSOP |
|
TLE2071CPIC OPAMP JFET 1 CIRCUIT 8DIP |
1,198 | - |
|
Datasheet | Excalibur™ | 8-DIP (0.300", 7.62mm) | Tube | Active | J-FET | 1 | - | 45V/µs | 10 MHz | - | 20 pA | 490 µV | 1.7mA | 48 mA | 4.5 V | 38 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
OPA2377QDGKRQ1IC CMOS 2 CIRCUIT 8VSSOP |
422 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 2V/µs | 5.5 MHz | - | 0.2 pA | 250 µV | 760µA (x2 Channels) | 50 mA | 2.2 V | 5.5 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-VSSOP |
|
|
LMV932MM/NOPBIC OPAMP GP 2 CIRCUIT 8VSSOP |
21,705 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 0.42V/µs | 1.5 MHz | - | 14 nA | 1 mV | 116µA (x2 Channels) | 100 mA | 1.8 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-VSSOP |
|
INA190A1IDDFRIC CURR SENSE 1 CIRCUIT TSOT23-8 |
13,878 | - |
|
Datasheet | Zero-Drift | SOT-23-8 Thin, TSOT-23-8 | Tape & Reel (TR) | Active | Current Sense | 1 | Rail-to-Rail | 0.3V/µs | 45 kHz | - | 500 pA | 3 µV | 48µA | - | 1.7 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | TSOT-23-8 |
|
LMH6601MGX/NOPBIC OPAMP VFB 1 CIRCUIT SC70-6 |
1,857 | - |
|
Datasheet | - | 6-TSSOP, SC-88, SOT-363 | Tape & Reel (TR) | Active | Voltage Feedback | 1 | Rail-to-Rail | 275V/µs | 155 MHz | 250 MHz | 5 pA | 1 mV | 9.6mA | 180 mA | 2.4 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | SC-70-6 |
|
LMV932MA/NOPBIC OPAMP GP 2 CIRCUIT 8SOIC |
1,729 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 0.42V/µs | 1.5 MHz | - | 14 nA | 1 mV | 116µA (x2 Channels) | 100 mA | 1.8 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
OPA1662AIDIC AUDIO 2 CIRCUIT 8SOIC |
4,009 | - |
|
Datasheet | SoundPlus™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Audio | 2 | Rail-to-Rail | 17V/µs | 22 MHz | - | 600 nA | 500 µV | 1.5mA (x2 Channels) | 30 mA | 3 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LPV511MG/NOPBIC OPAMP GP 1 CIRCUIT SC70-5 |
2,136 | - |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 0.0077V/µs | 25 kHz | - | 320 pA | 200 µV | 1.2µA | 1.3 mA | 2.7 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SC-70-5 |
|
OPA206ADRPROTOTYPE |
688 | - |
|
Datasheet | e-trim™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Push-Pull, Rail-to-Rail | 4V/µs | 3.6 MHz | - | 100 pA | 4 µV | 220µA | 25 mA | 4.5 V | 36 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
How can I narrow the current Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical filters to compare matching parts by specifications, stock status, pricing and datasheet information.
Can EGOO help source hard-to-find or obsolete Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send the manufacturer part number and required quantity to our sourcing team for availability, lead-time and alternative sourcing support.
Can I request a quotation for a BOM or small-batch requirement?
Yes. EGOO supports BOM sourcing, prototype quantities and small-batch purchasing. Provide your part list and quantities for a quotation review.
What information should I provide when requesting a quote?
Please provide the target part number, manufacturer, quantity and any required date code, package or delivery requirements so our team can respond more accurately.
